Search

In Stock

Immunoaffinity Column for Mycotoxin Aflatoxins Total B1,B2,G1,G2,M1,M2

The immunoaffinity column can selectively adsorb aflatoxins (B1, B2, G1, G2, M1, M2) from the sample solution, thereby purifying the sample. The purified sample solution can then be directly used for HPLC analysis.

Affinity columns can be used in combination with HPLC to achieve rapid testing, and to increase signal-to-noise ratio and improve the accuracy of the detection method.

This affinity column can be used for the extraction and purification of aflatoxins (B1, B2, G1, G2, M1, M2) in samples.

Order No.: HCM0250B

Package: 50T

  1. Overview:

Aflatoxins are toxic metabolites of a class of fungi (such as Aspergillus flavus and Aspergillus parasiticus). They are highly carcinogenic and are found mainly in grains, peanuts, nuts, cottonseeds, animal feed, vegetable oils, as well as animal tissues and blood. Among them, Aflatoxin B1 (AFT B1) ranks first in terms of toxicity, carcinogenicity and frequency of contamination. Aflatoxin M1 is a hydroxylated metabolite of Aflatoxin B1 and a strong carcinogen. Cow milk and its products are prone to Aflatoxin M1 contamination.

Specification: 3mL,25T;

Samples: Grain and oil, nuts, feed, herbs, tea, condiments, dairy products, etc.

  1. Principle:

The basis of the measurement is the antigen-antibody reaction. Antibodies are connected to the column and the aflatoxin in the sample is extracted, filtered, and diluted, and then passed slowly through the aflatoxin immunoaffinity column. The toxins bind to the antibodies in the column and the immunoaffinity column is then washed to remove other unrelated substances that have not been bound. Aflatoxins are then eluted with methanol and injected into an analytical instrument for detection.

  1. Storage conditions and period of validity

Storage Conditions: 2 to 8°C

  1. Components of the kit:

Each kit contains Aflatoxin immunoaffinity columns of various specifications and 1 instruction manual.

  1. Necessary items not provided in the box:

Equipment

HPLC/LC-MS/MS

Nitrogen gas evaporator apparatus

Nitrogen gas tank and pressure regulator

Air-pressure controller bracket

Air pump

Balance with 0.01g readability

High-speed homogenizer (maximum speed> 10,000 RPM) or shaker

High-speed freezing centrifuge (can be set to 10°C, 7, 500 RPM)

Centrifuge tube:50-mL

Constant temperature incubator or water bath (can be set to 35–37℃)

Grinder

Sieving screen:1-mm

Graduated cylinder: 100 mL/10 mL

Funnel: 50 mL

Syringe: 10 mL/20 mL

Pipette: 1 mL and pipette tips

Homogenization flask (or 250-mL conical flask with pestle)

Vials and tubes

Rapid qualitative filter paper

Microfiber filter paper (e.g. Whatman 934-AH)

Column holder and syringe connector plug (for use with immunoaffinity columns)

  1. Reagents

Methanol (CH3OH): Analytical grade for extraction/chromatography grade for elution

Acetonitrile (CH3CN): Analytical Grade

Sodium chloride (NaCl): Analytical Grade

TWEEN-20 (C58H114O26): Analytical Grade

Hydrochloric acid (HCl): Analytical Grade

Sodium hydroxide (NaOH): Analytical Grade

Potassium chloride (KCl): Analytical Grade

Potassium dihydrogen phosphate (KH2PO4): Analytical Grade

Disodium hydrogen phosphate dodecahydrate (Na2HPO4·12H2O): Analytical Grade

Distilled or deionized water

  1. Note:

Allow the immunoaffinity column to return to room temperature(22 to 25°C) before use.

The affinity column should be stored at 2 to 8°C, do not freeze.

Dot use any expired immunoaffinity column.

The sample volume can be increased or decreased appropriately as required, and the volume of the extraction solution should be adjusted accordingly.

Column capacity

Toxin nameColumn Capacity:ng
AFT B1
AFT B2
AFT G1
AFT G2
300
AFT M1100
AFT M2100

When the content of the toxin in the sample divided by the dilution factor is higher than the column capacity, it is necessary to reduce the volume of the sample solution appropriately, and retest.

The pH of the loading solution of the affinity column should be within the range of 6 to 8. If it deviates from this range, the pH should be adjusted with dilute hydrochloric acid or dilute sodium hydroxide.

Maintaining consistency (such as polarity, pH, and concentration)

between the test solvent loaded into any analytical instrument and the mobile phase can help eliminate any adverse solvent effects.

WARNING: Aflatoxin is toxic and carcinogenic; protective equipment such as gloves and masks should always be used during handling.

Vessels and tools used to handle toxin solutions should be completely immersed in a sodium hypochlorite solution (5% v/v) overnight.

Ensure the LC-MS/MS is clean and the tubing is primed appropriately for each run.

Follow appropriate instrument precautions if using HPLC.

Quantity

1-10, 11-100, 101-1000, 1001-10000

Bestsellers

Aflatoxin B1 Quantitative Rapid Lateral Flow Test Kit

The kit is a lateral flow immunochromatographic assay that determines a quantitative level for the presence of aflatoxin B1 and is intended for use in nuts, grain and feed. This method is suitable for the rapid on-site test.Brochure-Grains & Feed Test. PDFMeizheng Bio-Tech Company Overview. PDF

Immunoaffinity Column for Aflatoxin B1,B2,G1,G2

The immunoaffinity column can selectively adsorb aflatoxins (B1, B2, G1, G2) from the sample solution, thereby purifying the sample. The purified sample solution can then be directly used for HPLC or LC-MS/MS analysis.Affinity columns can be used in combination with HPLC or LC-MS/MS to achieve rapid testing, and to increase signal-noise ratio  and improve the accuracy of the detection method.

Immunoaffinity Column for 2-in-1 Aflatoxins (B1,B2,G1,G2) and Ochratoxin A

The immunoaffinity column can selectively adsorb aflatoxin (B1, B2, G1, G2) and Ochratoxin A from the sample solution, thereby having a highly targeted purification effect on the sample. The sample  solution that has been purified by passing through the affinity column can be directly used for HPLC analysis or for LC-MS/MS analysis after concentrating with nitrogen gas and resuspended.Order No.: HCM3725B/HCM3750BProduct Properties: AFT B1/B2/G1/G2 300ng, OTA 100ngSpecifications: 3mL,25T/50T

Aflatoxin M1 Immunoaffinity Column

Order No.: QC0068,QC0069,QC0131,QC0071Column Capacity:100 ngVolumn: 3mLPackage: 25/50T 

Neomycin/Paromomycin, Kanamycin, Gentamicin and Spectinomycin Milk Comb Rapid Test Kit

The Neomycin/Paromomycin, Kanamycin, Gentamicin and Spectinomycin Rapid Test Kit is a lateral flow assay that determines a qualitative level for the presence of neomycin/ paromomycin, kanamycin, gentamicin and spectinomycin antibiotic residues in raw cow’s milk.Brochure-Dairy Test. PDFMeizheng Bio-Tech Company Overview. PDF

Milk Tylosin and Tilmicosin Rapid Test Kit

Tylosin/Tilmicosin Rapid Test Kit is a Lateral Flow assay that determines the residues for the presence of tylosin/tilmicosin residues in raw milk.Brochure-Dairy Test. PDFMeizheng Bio-Tech Company Overview. PDF

Food Mycotoxin Deoxynivalenol (DON) ELISA Test Kit

The Deoxynivalenol ELISA Kit is a competitive ELISA for the qualitative or quantitative analysis of Deoxynivalenol in wheat, wheat flour, bran and wheat middlings, etc.Brochure-Grains & Feed Test. PDFMeizheng Bio-Tech Company Overview. PDF

 

Back to Top
Product has been added to your cart