Search

In Stock

Raw Milk Mycotoxin Aflatoxin M1 Quantitative Rapid Test Kit

Aflatoxin M1 Quantitative Rapid Test Kit is a lateral flow assay that determines a quantitative level for the presence of aflatoxin M1 in raw cow’s milk. This test is designed for rapid field use or daily control in laboratories.

Order no.: SC0374

Detection Range (ng/kg=ppt)

Detection range: 0ng/kg-150ng/kg Limit of quantification: 20ng/kg

Scop of Application

Raw cow’s milk

Kit Contents

  1. Name Specs Remark
  • Teststrips 12×8 strips 96 strips in total
  • Microwells 12x8wells 96 wells in total

Aflatoxin M1:

4 Strip reader

Sample Preparation

No sample preparation necessary.

Equipment Preparation

  • Turn on the Reader and warm up for 5minutes
  • Turnon the fully enclosed incubator and set the temperature to 30 ˚C
  • Beforetesting, the enclosed QR Code must been scanned just once for each kit lot to upload the information to the

Quality control preparation procedure

  • Negativecontrol

Add 2mL of deionized water into the negative control bottle; blend vigorously until the solid content dissolves completely.

  • Positivecontrol

Pipette 200μL of the prepared negative control into the positive control microwell, pipette up and down until the solid content dissolves completely.

  • Pipette200μL of the prepared positive control into the reaction microwell and follow the testing
  • Therecovery rate of the positive control is between 80-120%.
  • IMPORTANT:The reconstituted positive control should be used times.
  • Incubatethe sample for 3 minutes at 30˚C and then put one test strip into one
  • Letthe test strip develop color for 5 minutes at 30˚C.
  • Removethe absorbent pad and interpret test results within 1 minute.

Interpretation of the Results

  • Open the cassette, insert the quantitative test strip into the sample card slot, and ensure that the two bands on the surfaceof the white NC film are in the middle of the cassette
  • Insert cassette into Reader with cassette window facing up, andfollow the instrument’s operating procedures, click TEST to get

Precautions

  • Adhereto the instructions of test  Do not run more than 8 tests at one time.
  • Storetest kits at 2-8˚C when not in use, and do not use the kits beyond the expiration
  • Please don’t touch the membrane on the
  • Removemicrowell sealer slightly to prevent the powder from being released from the
  • Positivecontrol 1 bag
  • Negativecontrol 1 bottle
  • Pipette 1
  • Pipettetips 100
  • Microwellholder 1
  • QRcode 1

Materials Required but Not Provided

100ng/kg

Test Procedure

Note: READ COMPLETELY BEFORE USE! All reagents and kit components should reach room temperature (20-25˚C) before use. Shake the milk vigorously to ensure sample homogeneity.

  • Removethe cover of the tube and take appropriate number of test strips and microwells and immediately cover the  Re- store the remaining components at 2-8˚C.
  • Placethe microwells into the wells of the incubator (30 ˚C).
  • Usinga single channel pipette, add 200µL of milk sample to each microwell. Dissolve the coating conjugate in the microwell by pipetting the content up and down for 5 or 6
  • Thesample to be tested must be a homogeneous liquid which cannot be agglomerated, fermented, rancid precipitated, , and cannot be colostrum.
  • Thesample should be thoroughly mixed with the reagents in the microwells to avoid
  • Avoiddirect sunlight and direct blows during
  • Do not re-use pipette tips, test stripsor
  • Theunsealed microwells should be used within 1
  • Donot take tap-water, distilled water or deionized water as a negative
  • Afterincubation, be sure to immediately remove the sample

pad at the lower end of the test strip and read the result within

1 minute, because the color depth of the test strip will increase after drying, which affects the result.

  • Theinstrument must read the results using the accompanying reader and sample card
  • Thistest method is just used for rapid screening  If positive results are occurred, please verify them by a quantitative method.
  • The components in this test kit have been quality control testedas a standard batch  Do not mix components from different lot numbers.
  • Anyproblem encountered during usage, please contact with the

Storage and Shelf Life

  • Storage:The kits should be stored at a dry place away from the sunlight and the storage temperature is 2-8˚C. DO NOT FREEZE!
  • Shelf life: 12
  • Productiondate, expiration date and lot number please refer to the label on the out

Bestsellers

Aflatoxin B1 Quantitative Rapid Lateral Flow Test Kit

The kit is a lateral flow immunochromatographic assay that determines a quantitative level for the presence of aflatoxin B1 and is intended for use in nuts, grain and feed. This method is suitable for the rapid on-site test.Brochure-Grains & Feed Test. PDFMeizheng Bio-Tech Company Overview. PDF

Neomycin/Paromomycin, Kanamycin, Gentamicin and Spectinomycin Milk Comb Rapid Test Kit

The Neomycin/Paromomycin, Kanamycin, Gentamicin and Spectinomycin Rapid Test Kit is a lateral flow assay that determines a qualitative level for the presence of neomycin/ paromomycin, kanamycin, gentamicin and spectinomycin antibiotic residues in raw cow’s milk.Brochure-Dairy Test. PDFMeizheng Bio-Tech Company Overview. PDF

Aflatoxin M1 Immunoaffinity Column

Order No.: QC0068,QC0069,QC0131,QC0071Column Capacity:100 ngVolumn: 3mLPackage: 25/50T 

Immunoaffinity Column for Aflatoxin B1,B2,G1,G2

The immunoaffinity column can selectively adsorb aflatoxins (B1, B2, G1, G2) from the sample solution, thereby purifying the sample. The purified sample solution can then be directly used for HPLC or LC-MS/MS analysis.Affinity columns can be used in combination with HPLC or LC-MS/MS to achieve rapid testing, and to increase signal-noise ratio  and improve the accuracy of the detection method.

Immunoaffinity Column for 2-in-1 Aflatoxins (B1,B2,G1,G2) and Ochratoxin A

The immunoaffinity column can selectively adsorb aflatoxin (B1, B2, G1, G2) and Ochratoxin A from the sample solution, thereby having a highly targeted purification effect on the sample. The sample  solution that has been purified by passing through the affinity column can be directly used for HPLC analysis or for LC-MS/MS analysis after concentrating with nitrogen gas and resuspended.Order No.: HCM3725B/HCM3750BProduct Properties: AFT B1/B2/G1/G2 300ng, OTA 100ngSpecifications: 3mL,25T/50T

Tylosin/Tilmicosin, Erythromycin and Quinolones Milk Comb Rapid Test Kit

The Tylosin/Tilmicosin, Erythromycin and Quinolones Rapid Test Kit is a lateral flow assay that determines a qualitative level for the presence of tylosin/tilmicosin, lincomycin, erythromycin and quinolones antibiotic residues in raw cow’s milk.Brochure-Dairy Test. PDFMeizheng Bio-Tech Company Overview. PDF

T-2 Toxin Quantitative Lateral Flow Rapid Test Kit

The kit is a lateral flow immunochromatographic assay that determines a quantitative level for the presence of T-2 toxin and is intended for use in grains and feed. This method is suitable for the rapid on-site test.Brochure-Grains & Feed Test. PDFMeizheng Bio-Tech Company Overview. PDF

 

Back to Top
Product has been added to your cart